single coil pick-up insert
The Single Coil Pick-Up Insert can be used for stripping
and handling precast concrete elements, such as manholes,
utility structures.
Safe Working Load in this table is approximately 2:1 Safety Factor in 2,500 psi normal weight concrete.
NOTE: A typical 6" Single Pick-Up insert height is 5-3/4" to allow room for Plastic Locator Plug.
| single coil pick-up insert |
| Part #Plain |
Part # galvanized |
Coil Bolt dia. |
Coil &height |
swltension (lbs.) |
weight(lbs.) |
| 187-10604 |
187-50604 |
3/4 |
3/4 x 4 |
3,400 |
1.00 |
| 187-10605 |
187-50605 |
3/4 |
3/4 x 5 |
5,600 |
1.06 |
| 187-20605 |
187-60605 |
3/4 |
3/4 x 5-1/2 |
6,700 |
1.10 |
| 187-10606 |
187-10606 |
3/4 |
3/4 x 6 |
7,800 |
1.15 |
| 187-10607 |
187-50607 |
3/4 |
3/4 x 7 |
10,200 |
1.24 |
| 187-10608 |
187-50608 |
3/4 |
3/4 x 8 |
11,600 |
1.32 |
| 187-10804 |
187-50804 |
1 |
1 x 4 |
3,750 |
1.24 |
| 187-10805 |
187-50805 |
1 |
1 x 5 |
6,200 |
1.27 |
| 187-20805 |
187-60805 |
1 |
1 x 5-1/2 |
7,500 |
1.31 |
| 187-10806 |
187-50806 |
1 |
1 x 6 |
8,800 |
1.33 |
| 187-10807 |
187-50807 |
1 |
1 x 7 |
11,400 |
1.36 |
| 187-10808 |
187-50808 |
1 |
1 x 8 |
13,000 |
1.39 |
| 187-11004 |
187-51004 |
1-1/4 |
1-1/4 x 4 |
4,200 |
1.83 |
| 187-11005 |
187-51005 |
1-1/4 |
1-1/4 x 5 |
7,000 |
1.87 |
| 187-21005 |
187-61005 |
1-1/4 |
1-1/4 x 5-1/2 |
8,400 |
1.90 |
| 187-11006 |
187-51006 |
1-1/4 |
1-1/4 x 6 |
10,200 |
1.93 |
| 187-11007 |
187-51007 |
1-1/4 |
1-1/4 x 7 |
12,000 |
1.95 |
| 187-11008 |
187-51008 |
1-1/4 |
1-1/4 x 8 |
13,500 |
1.98 |
| 187-11204 |
187-51204 |
1-1/2 |
1-1/2 x 4 |
4,700 |
2.02 |
| 187-11205 |
187-51205 |
1-1/2 |
1-1/2 x 5 |
7,800 |
2.05 |
| 187-21205 |
187-61205 |
1-1/2 |
1-1/2 x 5-1/2 |
9,400 |
2.07 |
| 187-11206 |
187-51206 |
1-1/2 |
1-1/2 x 6 |
11,200 |
2.09 |
| 187-11207 |
187-11207 |
1-1/2 |
1-1/2 x 7 |
12,500 |
2.11 |
| 187-11208 |
187-51208 |
1-1/2 |
1-1/2 x 8 |
14,000 |
2.15 |
single edge lift insert
The Single Edge Lift Insert is designed to edge lifting precast
concrete elements. Inserts must have a 1/2" set-back from the
surface of the concrete and sufficient bolt penetration to achieve
load capacity.
| single edge lift insert |
| Part # plain |
Part # galvanized |
insert Type |
bolt Dia. |
length |
swl |
4" (lbs.) |
5" (lbs.) |
5-1/2" (lbs.) |
6" (lbs.) |
7" (lbs.) |
8" (lbs.) |
weight (lbs.) |
| 185-10608 |
185-50609 |
Single |
3/4" |
9" |
Tension |
1,500 |
1,500 |
1,500 |
1,500 |
1,500 |
1,500 |
1,50 |
| 185-10609 |
185-50609 |
Single |
3/4" |
9" |
Shear |
1,250 |
1,250 |
1,250 |
1,250 |
1,250 |
1,250 |
1,50 |
| 185-10812 |
185-50812 |
Single |
1" |
12" |
Tension |
1,500 |
3,000 |
1,500 |
3,600 |
4,300 |
4,800 |
3.30 |
| 185-10812 |
185-50812 |
Single |
1" |
12" |
Shear |
1,250 |
1,350 |
1,250 |
1,400 |
1,550 |
1,600 |
3.30 |
angle lift plate
The Angle Lift Plate is designed to be used in conjunction with a
double edge pickup insert or the double end pickup inserts.
Always use a cut washers with coil bolts.
| angle lift plate |
| Part # plain |
Part # galvanized |
bolt Dia. |
Min. Bolt Length |
swl Tension |
holes CL (A) |
holes CL (B) |
angle Thickness (T) |
length (L) |
height Width (W) |
weight (lbs.) |
| 228-0800 |
228-0810 |
1" |
4" |
12,000 |
12" |
12" |
3/4" |
21" |
6" |
45.0 |
| 228-1000 |
228-1010 |
1-1/4" |
4" |
18,000 |
15" |
15" |
3/4" |
21" |
6" |
53.0 |
| 228-1200 |
228-1210 |
1-1/2" |
4" |
18,000 |
15" |
15" |
3/4" |
21" |
6" |
53.0 |
edge lifting plate
The Edge Lifting Plate can be used for edge lifting where the panel
thickness exceeds 6".
Always use cut washers with coil bolts.
| edge lifting plate |
| Part # plain |
Part # galvanized |
bolt Dia. |
Min. Bolt Length |
swl Tension |
Plate Thickness (T) |
width (W) |
length (L) |
height (H) |
holes CL (S) |
weight (lbs.) |
| 229-0600 |
229-0610 |
3/4" |
4" |
8,800 |
1" |
4" |
18" |
5-1/2" |
12" |
23.0 |
| 229-0800 |
229-0810 |
1" |
4" |
8,800 |
1" |
4" |
18" |
5-1/2" |
12" |
23.0 |
coil setting plugs
The Coil Setting Plugs are used to secure the coil insert to the
formwork, while keeping the threads clean form concrete during
pouring operation.
| coil setting plugs |
| Part # |
size |
box Qty |
weight (lbs.) |
| 285-0401 |
1/2" x 2-1/2" |
100 |
5 |
| 285-0601 |
3/4" x 3-3/4" |
100 |
8 |
| 285-0801 |
1" x 5" |
100 |
16 |
coil nut
The Coil Nuts are used for a variety of applications, from
attachments to formwork..
| COIL NUT |
| Part # |
description |
Wgt. each |
| 190-0216 |
1/2" Coil Rod Nut (Std) |
0.07 |
| 190-0220 |
5/8" Coil Rod Nut (Std) |
0.11 |
| 190-0224 |
3/4" Coil Rod Nut (Std) |
0.13 |
| 190-0228 |
7/8" Coil Rod Nut (Std) |
0.30 |
| 190-0232 |
1" Coil Rod Nut (Std) |
0.44 |
| 190-0240 |
1-1/4" Coil Rod Nut (Std) |
0.72 |
ferrule insert
The Ferrule Insert is manufactured from solid bar stock 12L14 Cold
drawn steel. The inserts have Unified National Course standard
threads and captive back end. Minimum bolt engagement is the
bolt diameter, plus 1/8".
| ferrule insert |
| Part # plain |
Part # galvanized |
bolt Dia. |
thread Pitch |
Min. Bolt Engagement |
length |
ferrule Dia. |
weight |
box Qty ea. |
| 214-1200 |
214-1210 |
3/8" |
16 |
3/4" |
1-1/4" |
9/16" |
0.05 |
100 |
| 214-1600 |
214-1610 |
1/2" |
13 |
1" |
1-3/8" |
11/16" |
0.075 |
100 |
| 214-2000 |
214-2010 |
5/8" |
11 |
1-1/8" |
1-5/8" |
7/8" |
0.15 |
100 |
| 214-2400 |
214-2410 |
3/4" |
10 |
1-1/8" |
1-5/8" |
1" |
0.185 |
50 |
| 214-2800 |
214-2810 |
7/8" |
9 |
1-1/8" |
1-5/8" |
1-3/8" |
0.34 |
50 |
| 214-3200 |
214-3210 |
1" |
8 |
1-1/8" |
1-5/8" |
1-3/8" |
0.39 |
50 |
ferrule loop insert
The Ferrule Loop Insert is commonly used to make structural
connections and suspend various mechanical attachments.
Available in plain and electro-plated.
SWL based on 1/2" set-back from concrete surface. Minimum concrete strength of 3,000 psi normal weight concrete.
| ferrule loop insert |
| Part # plain |
Part # electro-Plated |
bolt Dia. |
swl Tension (lbs.) |
length |
insert Length |
insert Dia. |
inside Radius |
wire Dia. |
weight |
box Qty |
| 216-1200 |
216-1210 |
3/8" |
2,000 |
2-3/4" |
1-1/4" |
9/16" |
9/16" |
0.243" |
0.13 |
100 |
| 216-1600 |
216-1610 |
1/2" |
2,000 |
2-3/4" |
1-3/8" |
11/16" |
9/16" |
0.243" |
0.38 |
100 |
| 216-2000 |
216-2010 |
5/8" |
2,300 |
3-1/2" |
1-5/8" |
7/8" |
13/16" |
0.262" |
0.33 |
100 |
| 216-2400 |
216-2410 |
3/4" |
2,400 |
3-1/2" |
1-5/8" |
1" |
13/16" |
0.262" |
0.37 |
50 |
| 216-2800 |
216-2810 |
7/8" |
5,300 |
6" |
1-5/8" |
1-1/4" |
1-3/8" |
0.375" |
0.60 |
50 |
| 216-3200 |
216-3210 |
1" |
5,300 |
6" |
1-5/8" |
1-3/8" |
1-3/8" |
0.375" |
0.58 |
50 |
ferrule straight loop insert
The Ferrule Straight Loop Insert is commonly used to make
structural connections and suspend various mechanical
attachments. Available in plain and electro-plated.
| ferrule straight loop insert |
| Part # plain |
Part # galvanized |
bolt Dia. |
length |
swl Tension (lbs.) |
insert Dia. |
insert Length |
wire Dia. |
Min. Edge Distance |
weight |
| 213-1604 |
213-1614 |
1/2" |
4-1/8" |
3,000 |
11/16" |
1-3/8" |
0.225" |
5" |
0.25 |
| 213-1656 |
213-1666 |
1/2" |
6-1/8" |
4,000 |
11/16" |
1-3/8" |
0.306" |
8" |
0.38 |
| 213-2004 |
213-2014 |
5/8" |
4-1/8" |
3,000 |
7/8" |
1-5/8" |
0.225" |
5" |
0.35 |
| 213-2056 |
213-2066 |
5/8" |
6-1/8" |
5,000 |
7/8" |
1-5/8" |
0.375" |
8" |
0.48 |
| 213-2404 |
213-2414 |
3/4" |
4-1/8" |
3,000 |
1" |
1-5/8" |
0.225" |
5" |
0.54 |
| 213-2456 |
213-2466 |
3/4" |
6-1/8" |
5,000 |
1" |
1-5/8" |
0.375" |
9" |
0.67 |
| 213-2806 |
213-2816 |
7/8" |
6-1/8" |
5,000 |
1-3/8" |
1-5/8" |
0.375" |
9" |
0.75 |
| 213-3206 |
213-3216 |
1" |
6-1/8" |
5,000 |
1-3/8" |
1-5/8" |
0.375" |
9" |
0.75 |
| 213-3208 |
213-3218 |
1" |
8-1/8" |
6,000 |
1-3/8" |
1-5/8" |
0.375" |
9" |
1.02 |
SWL based on 1/2" set-back from concrete surface. Minimum concrete strength of 3,000 psi normal weight concrete. Safety Factor is approximately 3:1
NOTE: Not to be used for lifting.
thin slab ferrule insert
The Thin Slab Ferrule Insert is designed to be used in thin wall
concrete elements, where standard length inserts will not fit.
Available in plain and electro-plated.
| thin slab ferrule insert |
| Part # plain |
Part # galvanized |
bolt Dia. |
height (H) |
length (L) |
swl Tension (lbs.) |
insert Dia. (D) |
ferrule Length (F) |
wire Dia. (W) |
Min. Edge Distance |
weight |
| 219-1602 |
219-1612 |
1/2" |
1-3/4" |
4-1/2" |
1,200 |
11/16" |
1-3/8" |
0.225" |
5" |
0.25 |
| 219-2003 |
219-2013 |
5/8" |
2-7/16" |
4-3/4" |
2,500 |
7/8" |
1-5/8" |
0.306" |
6" |
0.44 |
| 219-2403 |
219-2413 |
3/4" |
2-7/16 |
4-7/8" |
2,650 |
1" |
1-5/8" |
0.306" |
6" |
0.48 |
| 219-2404 |
219-2414 |
3/4" |
3-5/8" |
4-7/8" |
4,500 |
1-3/8" |
1-5/8" |
0.306" |
8" |
0.67 |
| 219-3203 |
219-3213 |
1" |
2-7/16" |
5-1/8" |
4,500 |
1-3/8" |
1-5/8" |
0.375" |
6" |
0.75 |
| 219-3204 |
219-3214 |
1" |
3-5/8" |
5-1/8" |
4,500 |
1-3/8" |
1-5/8" |
0.375" |
6" |
0.75 |
| 219-3205 |
219-3215 |
1" |
4-5/8" |
5-1/8" |
6,500 |
1-3/8" |
1-5/8" |
0.375" |
9" |
1.02 |
"L" Leg ferrule insert
The “L” Leg Ferrule Insert is ideal for securing mechanical
equipment or connecting thin wall concrete elements. Available in
plain and electro-plated.
| "L" Leg ferrule insert |
| Part # plain |
Part # Galvanized |
bolt Dia. |
height (H) |
swl Tension (lbs.) |
insert Dia. (D) |
leg Length (R) |
insert Length (L) |
wire Dia. (W) |
Min. Edge Distance |
weight |
| 222-2403 |
222-2413 |
3/4" |
3-1/8" |
3,500 |
1-3/8" |
7" |
1-5/8" |
0.306" |
7" |
0.71 |
| 222-3104 |
222-3214 |
1" |
4-1/8" |
4,500 |
1-3/8" |
9-1/2" |
1-5/8" |
0.306" |
9" |
0.99 |
open ferrule insert
The Open Ferrule Insert is ideal for various precast applications.
The insert is constructed with UNC thread with an expanded coil to
increase the shear cone surface area, thus increasing the inserts
load capacity.
| open ferrule insert |
| Part # plain |
Part # electro-Plated |
bolt Dia. (NC) |
insert Length (A) |
tension (lbs.) |
shear (lbs.) |
no. Struts |
wire Dia. (D) |
open Coil Dia. (B) |
open Coil Length (C) |
weight |
| 223-2420 |
223-2421 |
3/4" |
4-5/8" |
4,250 |
4,250 |
2 |
0.375" |
2-1/8" |
1-1/2" |
0.55 |
| 223-2820 |
223-282 |
7/8" |
6-1/8" |
5,000 |
5,000 |
2 |
0.375" |
2-1/2" |
2-1/4" |
0.89 |
| 223-3220 |
223-3221 |
1" |
5-5/8" |
6,250 |
6,250 |
2 |
0.440" |
2-1/2" |
2-1/4" |
1.17 |
| 223-3240 |
223-3241 |
1" |
7-5/8" |
10,000 |
12,000 |
4 |
0.440" |
2-3/4" |
2-3/4" |
2.25 |
| 223-4040 |
223-4041 |
1-1/4" |
7-5/8" |
12,000 |
12,000 |
4 |
0.440" |
3" |
2-3/4" |
3.15 |
| 223-4060 |
223-4061 |
1-1/4" |
9-5/8" |
16,000 |
16,250 |
6 |
0.440" |
3" |
3-5/8" |
4.90 |
plastic nc threaded plug
| plastic nc threaded plug |
| Part # |
bolt Dia. |
thread Pitch |
weight ea. |
| 282-0800 |
1/4" |
20" |
.0005 |
| 282-1200 |
3/8" |
16" |
.007 |
| 282-1600 |
1/2" |
13" |
.008 |
| 282-2000 |
5/8" |
11" |
0.01 |
| 282-2400 |
3/4" |
10" |
0.02 |
| 282-2800 |
7/8" |
9" |
0.02 |
| 282-3200 |
1" |
8" |
0.03 |
The Plastic NC Threaded Plug is designed with a nail hole for easy
attachment to formwork. The plug is threaded onto the opening of
the insert to prevent concrete entering the threaded area during
pour operation.
steel nc threaded plug
| steel nc threaded plug |
| Part # |
bolt Dia. |
thread Pitch |
weight ea. |
| 281-0800 |
1/4" |
20" |
0.02 |
| 281-1200 |
3/8" |
16" |
0.03 |
| 281-1600 |
1/2" |
13" |
0.05 |
| 281-2000 |
5/8" |
11" |
0.06 |
| 281-2400 |
3/4" |
10" |
0.10 |
| 281-2800 |
7/8" |
9" |
0.13 |
| 281-3200 |
1" |
8" |
0.23 |
The Steel NC Threaded Plug is similar to the plastic insert, designed
with a nail hole for easy attachment to formwork.
plastic nc thread insert
| plastic nc thread insert |
| Part # |
bolt Dia. |
insert Length |
swl Tension (lbs.) |
weight ea. |
| 289-1200 |
3/8" |
1" |
1,200 |
0.01 |
| 289-1600 |
1/2" |
2-1/2" |
2,500 |
0.03 |
| 289-2000 |
5/8" |
3" |
3,000 |
0.04 |
| 289-2400 |
3/4" |
3" |
3,300 |
0.09 |
The Plastic Threaded Insert’s designed foot creates a large shear
cone in thin wall concrete elements.
steel nc thread insert
| steel nc thread insert |
| Part # |
bolt Dia. |
insert Length |
swl Tension (lbs.) |
weight ea. |
| 288-0801 |
1/4" |
1-1/2" |
750 |
0.04 |
| 288-1201 |
3/8" |
1" |
1,200 |
0.05 |
| 288-1202 |
3/8" |
1-3/8" |
1,400 |
0.06 |
| 288-1601 |
1/2" |
1-1/2" |
1,500 |
0.11 |
| 288-1602 |
1/2" |
2-7/8" |
3,000 |
0.28 |
| 288-2001 |
5/8" |
1-11/16" |
1,750 |
0.19 |
| 288-2002 |
5/8" |
2-7/8" |
3,000 |
0.34 |
| 288-2401 |
3/4" |
1-11/16" |
2,000 |
0.23 |
| 288-2402 |
3/4" |
2-7/8" |
3,500 |
0.30 |
The Steel Threaded Insert is similar to the plastic threaded plug.
Made from zinc alloy to resist rust and corrosion.
