GANG FORM BOLT
Gang Form Bolts are used with gang form ties and allows for the tie ends to be broken off before removing forms.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 050-2001 | Gang Form Bolt | box | 50 | 18.00 |
Plylag / Gang Waler Rod
Plylag / Gang Waler Rod are used for horizontal waling and vertical strong backs when gang forming. Gang Waler Rods are used with Gang waler plates and 1/2" coil rod nuts. Plylag / Gang Waler Rod also are used with coil ties.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 301-2006 | 6-1/4" Plylag GWR | each | 1 | 0.28 | 0 |
| 301-2007 | 6-3/4" Plylag GWR | each | 1 | 0.30 | 0 |
| 301-2010 | 9-3/4" Plylag GWR | each | 1 | 0.44 | 0 |
| 301-2015 | 14-3/4" Plylag GWR | each | 1 | 0.67 | 0 |
| 301-2018 | 17-3/4" Plylag GWR | each | 1 | 0.80 | 0 |
½” Hex Coil Rod Nut
1/2" Coil Rod Nuts are used with the gang waler rods and also J-Strong Back Rod & Hook. These nuts can also be used with 1/2" Coil Rod.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 190-0216 | 1/2" Hex Coil Rod Nut | each | 0 | 0.07 | 0 |
Lift Bracket Bolt
Lift Bracket Bolt is used to attach double duty lift bracket.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 050-0003 | Lift Bracket Bolt | box | 50 | 8.00 |
Guide Bolt
The Guide Bolt is used with the Adjustable Shear Wall Bracket. It locks the head plate slot of the Adjustable Shear Wall Bracket with a standard wedge bolt. The Guide Bolt provides a slope to help guide in ganged forms into the proper position.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 051-2400 | Guide Bolt | each | 1 | 0.10 |
Gang Waler Plate
Gang Waler Plates are used with the gang waler rods for horizontal and vertical waling. Also used with J-Strong Back Rod & Hook.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 302-1000 | Gang Waler Plate | each | 1 | 0.50 | 0 |
Double Duty Lifting Bracket
The Double Duty Lifting Bracket provides a place to attach rigging to pick up gang forms with a crane. The Double Duty Lifting Bracket has a vertical capacity of 2000 lbs (5-to-1 safety factor).
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 050-2002 | Double Duty Lifting Brkt. | each | 1 | 8.00 | 0 |
Column Lifting Corner
The Column Lifting Corner is used for lifting gang column forms. The Column Lifting Corner can be used as the outside corner for the top two feet of the gang columns. The Column Lifting Corner has a safe load capacity of 2000 lbs.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 051-9001 | Column Lifting Corner | each | 1 | 13.00 | 0 |
Adjustable Shear Wall Bracket
The Adjustable Shear Wall Bracket is recommended for support of gang forms when pouring on top of an existing wall. The bracket is attached to the existing wall with a 3/4"x3" high strength bolt into an anchor that was placed into the previous pour. The adjustable bracket has a vertical adjustment range of over 2 inches.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 051-5001 | Adjust. Shear Wall Brkt. | each | 1 | 8.50 |
Gang Form Adapter Sleeve
Gang Form Adapter Sleeve is used with gang form ties at locations where steel fillers are used.
| Part Number | Description | Unit | Sold As | Unit Wgt (lbs.) | Skid Qty |
|---|---|---|---|---|---|
| 302-0001 | Gang Form Adapter Sleeve | each | 1 | 0.58 |